PCB Milling Information
Send your Eagle CAD *.brd files to ieeeboards@gmail.com to have them milled.
The cost is $1.25 per square inch for single-sided boards and $1.75 per square inch for double-sided boards.
The minimum trace width should be 10 mil (10 one-thousandths of an inch). The minimum hole inner diameter is 20 mil. The holes are not plated so if you have a two-sided board you will have to make the connection between the two layers yourself.
The above prices do not include rub-outs.
The turn around time is estimated at about one week so please plan accordingly.
We are now closed for the summer break. (Updated April 12th, 2011)
Stay Connected
Keep track of IEEE McMaster on all your favorite social networks.
 |
 |
 |
Website designed by: Design-Venture - All rights reserved. Conforms to W3C Standard